Our DC / DC converters regulate the output voltage from the fuel cell stack to the end load, so you get stable and reliable operation from your fuel cell. This 25W converter accepts input voltages of 9.2 - 18 VDC and provides a regulated 12 VDC output voltage of up to 2.1A.
Applications Electronic equipment Hobby equipment Low-power lighting solutions
Characteristics 2: 1 wide entrance area Protection: short circuit / overload / overvoltage 1500 VDC I / O isolation Built-in EMI filter, low noise 100% full load burn-in test Fixed switching frequency at 83 KHz economical High reliability 1 year warranty
Specification
Input | |
| DC | 1.6 A / 24V |
| Efficiency | 72% |
| Range | 9.2 to 18 VDC |
| Output | |
| Range | 0 to 2.1 A |
| DC | 12 V |
| Line regulation | +/- 0.3% |
| Charge regulation | +/- 0.3% |
| Current | 2.1 A |
| Power | 25.2 W |
| Ripple & Noise (max.) | 120 mVp-p |
| Setup, Slope, Hold | 2.5s, 50ms, under full load |
| Voltage ADJ. offer | 11 to 16 VDC |
| Voltage Tolerance | +/- 1,0% |
Converter General |
|
| Humidity | 20% to 90% RH non-condensing |
| Oper. Temp. | -10 °C to + 60 °C (see power correction curve) |
| Protection | Overload: 105% to 150% rated output, Degree of protection: Return current limit, will be restored automatically after the fault condition has been corrected. Overvoltage: 16.8% to 20V / 10% load, Degree of protection: Hiccup mode will be restored automatically after the error condition has been corrected. |
DC-DC converter, Meanwell, 25 W single output
- Product Code: FE010555
- Availability: In Stock
-
268.94€
- Ex Tax: 226.00€
Tags: DC converter, DC-DC converter, direct current, transformer